Husky HME-423E - Manual (Page 29)

Configuration Using a Web Browser
4-13
4-6.8 SNTP Configuration
This feature allows the administrator to configure the SNTP (Simple Network Time Protocol) settings. The
SNTP enables users to synchronize the switch clock in the Internet.
SNTP Client
This feature is to enable or disable SNTP function to acquire the time
from the SNTP server.
Daylight Saving Time
This feature is to enable or disable daylight saving time function. When
daylight saving time function is enabled, it is required to configure the
daylight saving time period.
UTC Timezone
This feature is to set the switch location time zone. The following table
lists the different location time zones for reference.
Local Time Zone Conversion
from UTC
Time at 12:00
UTC
Local Time Zone Conversion
from UTC
Time at 12:00
UTC
November Time Zone - 1 hour 11 am CET - Central European
FWT - French Winter
MET - Middle European
MEWT - Middle European
Winter
SWT - Swedish Winter +1 hour 1 pm
Oscar Time Zone -2 hours 10 am EET - Eastern European,
USSR Zone 1 +2 hours 2 pm
ADT - Atlantic Daylight -3 hours 9 am BT - Baghdad, USSR Zone
2 +3 hours 3 pm
AST - Atlantic Standard
EDT - Eastern Daylight -4 hours 8 am ZP4 - USSR Zone 3 +4 hours 4 pm
EST - Eastern Standard
CDT - Central Daylight -5 hours 7 am ZP5 - USSR Zone 4 +5 hours 5 pm
CST - Central Standard
MDT - Mountain Daylight -6 hours 6 am ZP6 - USSR Zone 5 +6 hours 6 pm
MST - Mountain Standard
PDT - Pacific Daylight -7 hours 5 am WAST - West Australian
Standard +7 hours 7 pm