Husky HME-423E - Manual (Page 32)

Configuration Using a Web Browser
4-16
To add ports to a trunk group, select the wanted ports on the right hand side column, and click on Add.
To remove ports from a trunk group, selection the wanted ports on the left hand side column, and click on
Remove
.
After finishing necessary configurations, click on Apply to save the settings.
4-6.10.2 Aggregator Information
The settings in this feature will be different depending on whether LACP is enabled or disabled.
LACP Disabled
When LACP function is disabled in Aggregator Setting, the administrator will see the local static trunk
group information here.
Group Key This is a read-only column field that displays the trunk group ID.
Port Member
This is a read-only column field that displays the members of this
static trunk group.