Husky HME-423E - Manual (Page 26)

Configuration Using a Web Browser
4-10
After finishing necessary configurations, click on Apply to save the settings.
4-6.7 System Event Log
4-6.7.1 Syslog Configuration
This feature allows the administrator to configure the ways of keeping the system log files, and define the
system log server IP.
Syslog Client Mode
This feature allows the administrator to select the system log mode –
client only, server only, or both S/C.
Client only
: it means the system log will only be saved in the switch.
Server only : it means the system log will only be saved in a connected
PC or server.
Both S/C
: it means the system log will be saved in both the switch and
the PC.
System Log Server IP
Address
This feature allows the administrator to assign the system log server IP.
After finishing necessary configurations, click on Reload to refresh the event log, or click on Clear to erase
all current event logs. And then click on Apply to save the settings.
The system log saved in the switch when the Client only mode is selected will be lost once
the switch is restarted.