Updating firmware by tftp, Restoring configurations by tftp, Backing up configurations by tftp – Husky HME-423E User Manual
Page 21
Configuration Using a Web Browser
4-5
After finishing necessary configurations, click on Apply to save the settings.
4-5.6 Updating Firmware by TFTP
This feature allows the administrator to update the switch firmware. Before updating, make sure the TFTP
server is ready and the firmware image is on the TFTP server.
TFTP Server IP Address
Use this feature to fill in your TFTP server IP.
Firmware File Name
Use this feature to fill in the name of the firmware image.
After finishing necessary configurations, click on Apply to save the settings.
4-5.7 Restoring Configurations by TFTP
You can restore EEPROM value from the TFTP server. Before doing so, make sure the image file is already
placed on TFTP server. The HME-421E/423E will download the flash image.
TFTP Server IP Address
Use this feature to fill in your TFTP server IP.
Firmware File Name
Use this feature to fill in the correct file name to be restored.
After finishing necessary configurations, click on Apply to save the settings.
4-5.8 Backing up Configurations by TFTP
With this feature, the administrator can save the current configurations from the HME-421E/423E to the
TFTP server, and then go to the TFTP restoration configuration page to restore the settings.
TFTP Server IP Address
Use this feature to fill in your TFTP server IP.
Firmware File Name
Use this feature to fill in the file name.