Husky HME-423E - Manual (Page 30)

Configuration Using a Web Browser
4-14
PST - Pacific Standard
ADT - Alaskan Daylight -8 hours 4 am CCT - China Coast, USSR
Zone 7 +8 hours 8 pm
ALA - Alaskan Standard -9 hours 3 am JST - Japan Standard,
USSR Zone 8 +9 hours 9 pm
HAW - Hawaiian Standard -10 hours 2 am EAST - East Australian
Standard GST
Guam Standard, USSR
Zone 9 +10 hours 10 pm
Nome, Alaska -11 hours 1 am IDLE - International Date
Line
NZST - New Zealand
Standard
NZT - New Zealand +12 hours Midnight
SNTP Sever URL This feature is to define the SNTP server IP address.
Daylight Saving Period
This feature is to set up the Daylight Saving beginning time and Daylight
Saving ending time. Both will be different every year.
Daylight Saving Offset
(mins)
This feature is to set up the offset time.
Switch Timer This feature displays the switch current time.
After finishing necessary configurations, click on Apply to save the settings.
4-6.9 IP Security
IP security function allows the administrator to grant 10 specific IP addresses the access to the switches
through a web browser.
IP Security Mode
When this option is enabled, the Enable HTTP Server and Enable
Telnet Server
check boxes will then be available.
Enable HTTP Server
When this option is checked, the IP addresses among Security IP1- IP10
will be allowed to access via HTTP service.
Enable Telnet Server
When this option is checked, the IP addresses among Security IP1-IP10
will be allowed to access via telnet service.
Security IP 1-10
This feature allows the administrator to assign up to 10 specific IP
addresses. Only these 10 IP addresses can access and manage the
switch through a Web browser.