Husky HME-423E - Manual (Page 71)

Command Set Lists
C-9
community
[Community-string]
trap-version
[v1|v2c]
(remove)
switch(config)#
no snmp-server host
192.168.1.50
snmpv3 context-name
[Context Name ]
G Configure the context
name switch(config)#snmpv3 context-name
Test
snmpv3 user
[User Name]
group
[Group Name]
password
[Authentication Password]
[Privacy Password]
G
Configure the userprofile
for SNMPV3 agent.
Privacy password could
be empty. switch(config)#snmpv3 user test01
group G1 password AuthPW PrivPW
snmpv3 access
context-name
[Context
Name ]
group
[Group Name ]
security-level
[NoAuthNoPriv|AuthNoPriv|
AuthPriv]
match-rule
[Exact|Prifix]
views
[Read View Name] [Write
View Name] [Notify View
Name]
G
Configure the access
table of SNMPV3 agent switch(config)#snmpv3 access
context-name Test group G1
security-level AuthPriv
match-rule Exact views V1 V1 V1
snmpv3 mibview view
[View Name]
type
[Excluded|Included]
sub-oid
[OID]
G
Configure the mibview
table of SNMPV3 agent switch(config)#snmpv3 mibview view
V1 type Excluded sub-oid 1.3.6.1
show snmp
P
Show SNMP
configuration switch#show snmp
no snmp community-strings
[Community]
G
Remove the specified
community. switch(config)#no snmp
community-strings public
no snmp-server host
[Host-address]
G
Remove the SNMP server
host. switch(config)#no snmp-server host
192.168.1.50
no snmpv3 user
[User Name]
G
Remove specified user of
SNMPv3 agent. switch(config)#no snmpv3 user Test
no snmpv3 access
context-name
[Context
Name ]
group
[Group Name ]
security-level
[NoAuthNoPriv|AuthNoPriv|
AuthPriv]
match-rule
[Exact|Prifix]
views
[Read View Name] [Write
G Remove specified access
table of SNMPv3 agent. switch(config)#no snmpv3 access
context-name Test group G1
security-level AuthPr
iv match-rule Exact views V1 V1 V1