Husky HME-423E - Manual (Page 22)

Configuration Using a Web Browser
4-6
After finishing necessary configurations, click on Apply to save the settings.
4-5.9 Saving Configuration Files
This feature allows the administrator to save all configurations made for the HME-421E/423E. Click Save to
save all of the HME-421E/423E’s settings to the flash memory.
4-5.10 Factory Default
This feature allows the administrator to reset the HME-421E/423E to the default settings. Click Reset to
reset all configurations to the default value.
4-5.11 Rebooting System
This feature allows the administrator to reboot the HME-421E/423E. Click Reboot to restart the switch.
4-6 Advanced Management Settings
This section covers the instructions on how to configure HME-421E/423E’s advanced management
functions.
4-6.1 Port Control
This feature allows the administrator to configure each port’s settings and view the port status.
Port
This column is for you to select the port that you want to configure.
State
This column shows the current port status, and also allows you to enable
or disable the port. If the port is disabled, no packet will be transmitted or
received by this port.
Negotiation This feature allows you to configure the negotiation function to be Auto