Reviewing the telnet command table (continued) – FARGO electronic HDPii User Manual

Page 123

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)

6-11

Reviewing the Telnet Command Table (continued)

Telnet Command

Command Purpose

Command Format

addr

Store a new IP
address.

store net addr <ADDRESS>

mask

Store a new address
mask.

store net mask <MASK>

gateway Store a new default

gateway.

store net gateway <ADDRESS>

dns

Store a new DNS
server address.

store net dns <ADDRESS>

domain

Store a new DNS
domain suffix.

store net domain <STRING>

opts

Enable or disable
automatic address
assignment using
DHCP. Static (non-
automatic) addresses
will come from the
stored or default
settings, depending on
the other settings.

To enable automatic address
assignment:

store net opts dhcp

To disable automatic address
assignment:

store net opts -dhcp

net

from

Restore the network
settings from either the
default settings or the
current settings.

store net from default|current

mode

Specify the Ethernet
interface mode as:
automatic, full or half
duplex; 10 or 100 mHz.
(NOTE: 100 mHz. is
not supported by the
Printer).

store ifc mode
auto|10half|10full|100half|100full

store

ifc

from

Set the Ethernet mode
settings from the
default or current
settings.

store ifc from default|current

Advertising