Adjusting the transfer dwell time and temperature – FARGO electronic HDPii User Manual
Page 245
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
7-58
Adjusting the Transfer Dwell Time and Temperature
Step Procedure
3
Return to the factory default settings for the selected Card Type by clicking
on the Default button. If using cards (that differ from the Card Type Glossy-
PVC or Matte-PVC options), select one of the Card Type Custom options.
4
Adjust the dwell time and temperature settings to ensure proper image
transfer. Determine the appropriate settings for the card stock by setting the
Transfer Dwell Time and Transfer Temperature to the default settings.
Print a card.
• If the Film is not transferring properly, adjust these settings accordingly.
OR
• If the Film is transferring properly, perform a final durability test called the
Tape Test.
For instructions on how to do a tape test, see Conducting the Tape adhesion
Test procedure.