FARGO electronic HDPii - Manual (Page 173)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 6-61
Saving addresses
Step Procedure.
1 See the Accessing the Network Setup Menu procedure to access the
Network Settings menu:
Options -> MENU -> Next -> Network Settings
2 Select Next on the LCD to view the Save Addresses menu entry.
3 Press the Select button to save the current network settings (IP address,
GW, SN Mask) as the stored settings which will be used when automatic
address assignment using DHCP is disabled.
Resetting Passwords
Step Procedure
1 See the Accessing the Network Setup Menu procedure to access the
Network Settings menu:
Options -> Menu -> Next -> Network Settings
2 Select Next on the LCD to view the Reset Passwords menu entry.
3 Press the Select button to reset the User passwords to the default settings of
empty strings.
(Note: This can be used when the passwords are not known.)