FARGO electronic HDPii - Manual (Page 86)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 5-13
Troubleshooting with the LCD Error Message Table (continued)
LCD Error Message Cause Solution
No E-card Encoder
(PC Error Message
No. 202)
You are trying to send
encoding data, but the
Printer is not configured with
this Encoder type. You are trying to send
encoding data, but the Printer
is not configured with this
Encoder type.
No Film
(PC Error Message
No. 28)
Film is not installed in the
Printer.
OR
Film RFID tag is bad. Install the Film and press
Resume.
To cancel the print, press the
Cancel Print button or the
Cancel button located on the
Printer.
No Flip Module
(PC Error Message
No. 201)
Two-sided job sent to a one-
sided Printer. Verify the Printer has flipper
capabilities via the LCD Menu.
If Output capabilities are
present, ensure that the Print
Both Sides option in the
Driver is set correctly.
Press the Resume button on
the Printer’s Front Cover to
continue printing.
To cancel the print, press the
Cancel Print button from the
Driver’s display dialog.