FARGO electronic HDPii - Manual (Page 58)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 3-20
Connecting Power to Printer (continued)
Display B - Connecting the other end of the AC power cable to a Surge Protector. See both
notes below.
Note No. 1: Instead of connecting the AC power cable directly into an AC outlet, it is
recommended that a Surge Protector be used to protect against power surges.
Note No. 2: Some buildings have surge protection built into the electrical outlets. Please
consult your building supervisor regarding this feature.