Configuring the network settings, Configuring the network settings -16 – FARGO electronic HDPii User Manual

Page 128

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)

6-16

Reviewing the Home Page Categories and Fields (table)

You can view these categories and fields in the following table.

Category Field

Purpose

Serial Number

Displays the unique fixed serial number of the
Printer.

Fixed for
Printer

Hardware Address

Displays the unique fixed hardware address
(MAC) of the Printer, which is the unique
Ethernet device identifier.

Label

Indicates the label that the User assigns to the
Printer. This label is reported to the DHCP
server as the Host Name (that may be used by
the DNS server to resolve the IP address of the
Printer).

If left blank, the Printer will use a unique label
based on the MAC address of the Printer.

Location

Indicates the location string that the User
assigns to the Printer.

Set by User
(May be
configured via
Telnet or from
the
Administration
web page.)

Contact

Indicates the contact person string that the
User assigns to the Printer.

Printer Firmware
Version

Displays the current Firmware version.

Set by
Firmware

Boot Loader
Firmware Version
(Printer only)

Displays the current boot loader Firmware
version.

Configuring the Network Settings

The procedures needed to configure the network settings are presented in this section.

Advertising