Technical specifications (continued) – FARGO electronic HDPii User Manual

Page 25

Advertising
background image

RESTRICTED USE ONLY

Fargo Electronics, Inc.

HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)

2-12

Technical Specifications (continued)

Term Description

Mechanical
Security

Locking override:

The locking solenoid has a mechanical lock override (that allows
access to the secured areas of the Printer with the appropriate key).
This lock has a barrel-type key.

Restricted access:

With the cover closed and locked, the user will not have access to
the following areas of the printer:

• Reject Hopper
• Flipper Access Door
• Ribbon/Film Cartridge access area
• Card Input Hopper

Memory 16MB

RAM

Operating
Temperature

65º F to 90º F (18º C to 32º C).

Options

• Magnetic stripe encoding dual-sided (simultaneous)
• Smart card encoding (contact/contactless)
• Printer cleaning kit

Output Hopper
Card Capacity

100 cards (.030mm)

Physical Security

The Printer has base-plate tie down points for physical security
(built-in bolt-holes or a Kensington-type lock receptacle).

Power Supply

• 80W

(Note: This product is intended to be supplied by a Listed Power
Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)

Advertising