Printing a test print image, Printing a test print image -31 – FARGO electronic HDPii User Manual
Page 69
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
3-31
Printing a Test Print Image
Step Procedure
1
Install a YMCK, YMCKI or YMCKK Ribbon in the Printer for the Test Print.
2
Open the Driver settings.
a. From your computer’s startup menu, select Settings > Printers and Faxes
(Windows XP) or > Printers (Windows 2000).
b. Double click on the Card Printer under the Printer’s window.
c. Select Printing Preferences under the Printer drop-down menu. (Note: This
will bring up the Printing Preferences window.)
3
a. Select the Card tab, and then click on the Test Print button, as shown in
Display A on the next page.
b. When
the
Test Print button is selected, an image is copied to the Printer.