FARGO electronic HDPii - Manual (Page 247)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1) 7-60
Using the Magnetic Encoding tab
Use these options only if the Printer has an optional Magnetic Stripe Encoding Module
installed. The Card Printer can be installed with one of two types of factory-installed Magnetic
Stripe Encoding Modules: an ISO or JIS II Encoder Module. (Note: If no Encoder is
detected, the tab is active but all functions are grayed out.)
Step Procedure
1 Select the Magnetic Encoding tab to display options for controlling the
Magnetic Stripe encoding process. (Note: The following describes these
options and the Printer's magnetic encoding process.)