Gateway DC-M40 - Manual (Page 23)

R E A D Y
23
PREPARATION
Inserting the CF CARD
1. Pull the card cover in the direction of the arrow to
open.
2. Insert the card towards the arrow. The back side of the
CF CARD and the LCD monitor should face in the same
direction when the card is inserted.
The label side of the CF CARD should face the back of
camera.
3. To close the card cover, push the card in the opposite
direction of the arrow in step 1until you hear a click.
Removing the CF CARD
1.Turn the Power off with the power button( 1 )
2.Open the card cover and push the card eject lever( 2 )
3.Pull the CF CARD out of the stot.
Note
• Repeated use of a CF CARD will eventually reduce the card’s performance.
Should this be the case, you will need to purchase a new CF CARD.
• If you open the card cover when the camera power is turned on, the
camera will turn off automatically.
1
2