Gateway DC-M40 - Manual (Page 49)

A D V A N C E D
49
SETTING UP THE SHOOTING FUNCTION
SHARPNESS
• In STILL IMAGE and MACRO SHOT mode, you can select the image sharpness.
• Select the desired SHARPNESS (SOFT/NORMAL/HARD) depending on the
subject matter.
1.Rotate the mode dial to the SHOT mode.
2.Press the MENU button and press the UP ( ) / DOWN
( ) button to select [SHARPNESS].
3.Press the RIGHT ( ) button to select the [SHARPNESS]
sub menu.
4. Select the desired sharpness setting by pressing the UP
( ) / DOWN ( ) button. The default is NORMAL.
5. After selecting the desired sharpness setting, press the
OK button to confirm the setting.
6.Press the MENU button to cancel the menu display.
Reference
Explanation of SHARPNESS sub menu
• SOFT: This gives smooth edges and the final image will have a soft appearance.
• NORMAL: This setting will give a standard finish to the final image.
• HARD: This will give the image a crisp and clear appearance.
STILL IMAGE mode