Gateway DC-M40 - Manual (Page 42)

A D V A N C E D
42
SETTING UP THE SHOOTING FUNCTION
SHOOTING MODE
• This mode allows continuous shooting.
• In this mode, you can take moving subjects continuously.
• Once a continuous shooting sequence has been completed, the camera resets to
single shooting mode.
1. Rotate the mode dial to the SHOT mode.
2. Press the MENU button and press the UP ( ) / DOWN
( ) button to select [SHOOTING MODE].
3. Press the RIGHT ( ) button to select the [SHOOTING
MODE] sub menu.
4. Select the desired shooting mode by pressing the UP
( ) / DOWN ( ) button. The default is SINGLE
5. After selecting the desired mode, press the OK button
to confirm the setting.
6. Press the MENU button to cancel the menu display.
Reference
• When [CONTINUOUS] is selected, the flash will automatically be cancelled.
• To stop the CONTINUOUS shooting, release the shutter button.
STILL IMAGE mode