Gateway DC-M40 - Manual (Page 64)

A D V A N C E D
64
SETTING UP THE CAMERA SYSTEM
POWER OFF
• This function turns the camera off after setting the amount of time in order to
prevent unnecessary battery drainage.
• You can set the power to turn off at any specified time (1,3,5,10,or 30 Minutes)
from the last operation. Note that the automatic power off does not operate if
the camera is in slide show or PC mode.
1.Rotate the mode dial to the SETUP mode. A MENU will
display on the LCD monitor.
2.Press the UP ( ) / DOWN ( ) button and select
[POWER OFF].
3.Press the RIGHT ( ) button to select the [POWER OFF]
sub menu.
4.Select the desired time by pressing the UP ( ) /
DOWN ( ) button. The default is 3MIN.
5.After selecting the desired time, press the OK
button to confirm the setting.