Gateway DC-M40 - Manual (Page 92)

S O F T W A R E
92
CONNECTING THE CAMERA FOR MAC
Connecting the USB cable to the camera for MAC
• The USB port has to be on the Macintosh or keyboard.
1. Connect the USB cable to the USB port on the
Macintosh.
2. Connect the other end of the USB cable to the USB
port on the camera.
3. Rotate the mode dial to PC mode ( ).
4. Switch the camera on.
How to install and use the USB driver for MAC
• Setting up the USB Driver for MAC
The USB Driver for MAC is not included with the Application CD as MAC OS sup-
port the camera driver.
Check the MAC OS.
This camera is available in MAC OS 9.0~10.1.3.
Note
Before connecting the camera to a MAC, make sure that the CF CARD is inserted
in the card slot.
Connect the camera to the Macintosh and turn the camera power on in PC mode.
A new icon (Untitled) will be displayed on the desktop after connecting the cam-
era to the MCA.
Using a USB Driver for MAC
1. Double click a new icon (Untitled) on the desktop and the folder in the CF
CARD will be displayed.
2. Select an image file and copy or move it to MAC.
• Disconnecting the camera from the computer
Macintosh:
1.Drag the “untitled” removable drive icon on the desktop to the Trash.
2.Unplug the USB cable from the camera.