Gateway DC-M40 - Manual (Page 41)

A D V A N C E D
41
• UP button ( ) : Pressing the UP button
makes the cursor move up.
• DOWN button ( ) : Pressing the DOWN button
makes the cursor move down.
• LEFT button ( ) : Pressing the LEFT button
makes the cursor move left.
• RIGHT button( ) : Pressing the RIGHT button
makes the cursor move right.
• OK button : Pressing the OK button confirms
the selection.
• When the menu is displayed on the LCD monitor, it is not possible to operate
the shutter button to take an image. To take an image, simply cancel the menu
display by pressing the MENU button. The menu will no longer display and the
camera is ready to take an image.
FOCUSING
• In STILL IMAGE and MACRO SHOT mode, you can select the focusing range.
1. Rotate the mode dial to the SHOT mode.
2. Press MENU button to display the menu on the LCD
monitor and press the UP ( ) / DOWN ( ) button to
select [FOCUSING].
3. Press the RIGHT ( ) button to select the [FOCUSING]
sub menu.
4. Select the desired option by pressing the UP ( )/
DOWN ( ) button. The default is CENTRAL.
5. After selecting the desired range, press the OK button
to confirm the setting.
6. Press the MENU button to cancel the menu display.
STILL IMAGE mode