Gateway DC-M40 - Manual (Page 74)

A D V A N C E D
74
IMPORTANT NOTE
* If the camera is exposed to electronic interference, it will turn itself off to
protect the CF CARD.
* Maintenance
• Use a soft brush (available from photo stores) to GENTLY clean the lens and
LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning
fluid can be used.
• Clean the camera body with a soft cloth. Do not allow this camera to come into
contact with solvent materials such as benzol, insecticide, thinners or similar
products.
• Rough handling can damage the LCD monitor. Take care to avoid damage and
keep the camera in its protective carry case at all times.
* DO NOT attempt to disassemble or modify the camera.
* Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
* When images are uploaded or downloaded, the data transfer may be affected
by static electricity. In this case, disconnect and re-connect the USB cable
before trying the transfer again.