Gateway DC-M40 - Manual (Page 66)

A D V A N C E D
66
SETTING UP THE CAMERA SYSTEM
BEEP
• A beep sound will occur when you press the camera button.
1.Turn the camera power on.
2.Rotate the mode dial to the SETUP mode and a MENU
will display on the LCD monitor.
3.Press the UP ( ) / DOWN ( ) button to select [BEEP].
4.Press the RIGHT ( ) button to select the [BEEP] sub
menu.
5.Select the desired setting by pressing the UP ( ) /
DOWN ( ) button. The default is ON.
6.After selecting the desired setting, press the OK
button to confirm the setting.