Gateway DC-M40 - Manual (Page 39)

A D V A N C E D
39
SETTING UP THE SHOOTING FUNCTION
Reference
• Images taken using the digital zoom may take a little longer for the camera to
process. Allow time for this to take place.
• The digital zoom cannot be used in movie clip shots.
• You may notice a decrease in image quality when using digital zoom.
Note
• Take care not to touch the lens during the zoom operation as this may cause
damage. Take care not to touch the lens to avoid a dim image and
camera malfunction.
• When the camera is turned on, take care not to touch the camera’s moving
parts of the lens as this may make the image dim.
• Take care not to touch the lens during the zoom operation as this may make
the image dim. If the image is dim, turn the camera power off and turn it on
again to modify the lens position.
OK button
• Press the OK button to save changes made with the / / / button.
UP button
• When the menu is displayed on the LCD monitor, pressing the UP( )button
makes the cursor shift up or changes the sub menu.
DOWN button
• When the menu is displayed on the LCD monitor, pressing the DOWN ( )but-
ton makes the cursor shift down or changes the sub menu.