Gateway DC-M40 - Manual (Page 68)

A D V A N C E D
68
SETTING UP THE CAMERA SYSTEM
RESET
• This menu allows you to reset all the camera settings to the default.
1. Rotate the mode dial to the SETUP mode and a MENU
will display on the LCD monitor.
2. Press the UP ( ) / DOWN ( ) button to select
[RESET].
3. Press the RIGHT ( ) button to select the [RESET] sub
menu.
4. Select the desired sub menu by pressing the UP ( ) /
DOWN ( ) button.
-Selecting [NO]: The menu display returns to the
initial display.
-Selecting [YES]: The [ARE YOU SURE?] message
will display. Selecting [NO]
makes the menu display returns
to the initial display. If you select
[YES],the camera setting is
returned to the default.