Gateway DC-M40 - Manual (Page 59)

A D V A N C E D
59
SETTING UP PLAY BACK FUNCTIONS
SLIDE SHOW
• Images can be displayed continuously at pre - set intervals.
1.Rotate the mode dial to the PLAY mode.
2.Press the MENU button and press the UP ( ) / DOWN
( ) button to select [SLIDE SHOW].
3. Press the RIGHT ( ) button to select the [SLIDESHOW ]
sub menu.
4.Press UP ( ) / DOWN ( ) button and Select [START].
5.Press the OK button to start the menu display.
6.To stop the SLIDE SHOW, press the PLAY & PAUSE ( )
button.
• Selecting direction
Select SLIDE SHOW DIRECTION
1. Select [DIRECTION] in step 4 by pressing the UP ( ) / DOWN ( ) button.
2. Press the RIGHT ( ) button to select the [DIRECTION] sub menu.
3. Select the desired option by pressing the UP ( ) / DOWN ( ) button.
4. After selecting the desired option, press the OK button to confirm the
setting.
• Selecting TIME
• Select SLIDE SHOW delay time.
• You can select 2 SEC, 3 SEC, 5 SEC, or 10 SEC delay time.
1.Select [TIME] in step 4 by pressing the UP ( ) / DOWN ( ) button.
2.Press the RIGHT ( ) button to select the [TIME] sub menu.
3.Select the desired time by pressing the UP ( ) / DOWN( ) button.
4.After selecting the desired time, press the OK button to confirm the
setting.