Gateway DC-M40 - Manual (Page 83)

S O F T W A R E
83
HOW TO SET UP THE SOFTWARE FOR WINDOWS
How to set up the software
After inserting the CD-ROM provided with this camera into the CD-ROM
drive, the following screen is automatically pop-up.
1. Driver : This enables images to transfer between the
camera and PC.
• Driver installation for Windows : refer to page 84
2. Application : Arcsoft Photo Impression, Video
Impression, Digital Image : image editing program.
Refer to page 88.
3. User's Guide : Detail & advanced introduction for
DC-M40.
4. Web Site Link : You can visit Gatway at
http://www.gatway.com/
Reference
• Check the system requirements (page 80 and 81) before setting up the driver.
• You should allow 5 to 10 seconds for running the automatic setup program
according to the capability of the computer.