Gateway DC-M40 - Manual (Page 71)

A D V A N C E D
71
CONNECTING TO AN EXTERNAL MONITOR
Connecting to an external monitor
• In PLAY mode, you can view the stored images or movie clips by connecting the
camera to an external monitor via the video cable. When the camera is
connected to an external monitor, the LCD monitor will be turned off
automatically.
When the camera is connected to an external monitor, the menu will be
visible on the external monitor.
• Selecting the Video output type
• You can select an NTSC or PAL video output signal, depending on the external
equipment (monitor or TV) that you wish to connect to.
Refer to page 67 [VIDEO OUT] about selecting the video output from the
camera.
Reference
• When using a TV as an external monitor, you will need to select the external or
AV channel of the TV.
• When using a TV as an external monitor, the sound information cannot
be played back.
• There will be a digital noise on the external monitor, but it is not a
malfunction.
• If the image is not in the center of screen, use the TV controls to center it.