Gateway DC-M40 - Manual (Page 91)

S O F T W A R E
91
REMOVING THE USB DRIVER FOR WINDOWS
Removing USB Driver for Windows
1. Click [Add/Remove programs] in control panel.
2. After selecting Gateway DC-M40 , click [Add/Remove] and the following
window will be displayed.
Reference
If you are a Windows 2000/ME/XP user, follow the procedure below to remove
the USB Driver.
1. Connect the PC to the camera (PC mode, power on).
2. As mentioned above, remove 410GW in [Add/Remove programs].
3. Click the [Unplug or Eject Hardware] icon on the task bar.
Click [Stop] in the [Unplug or Eject Hardware] window and click [Ok] on the
next windows.
4. Click [System] in Control Panel.
Click [Device Manager] Universal serial bus controller USB Mass Storage
Device] and click the right mouse button.
5. Click [Remove] to remove the USB Driver.
6. Restart the computer.