Gateway DC-M40 - Manual (Page 26)

R E A D Y
26
PREPARATION
Selecting the date and time
• You will need to check and select the correct Date/ Time when
the camera is used for the first time or the batteries have been
removed.
• The DATE/TIME will only be displayed on the LCD monitor. When you print
the image, the DATE/TIME will not be printed.
• The DATE and TIME will be displayed on the lower end of the LCD monitor in
PLAY mode.
• The DATE and TIME will NOT be displayed in STILL IMAGE/MACRO SHOT/
MOVIE CLIP mode.
1. Turn on the power by pressing the Power button.
2. Set the mode dial to the SETUP mode ( ).
3. The setup menu will be displayed on the LCD monitor.
4. Move to [DATE/TIME] menu by using the DOWN
button ( )on the 5-function button.
5. Move to [DATE/TIME] sub menu by using the RIGHT
button ( ) on the 5-function button.
• Selecting DATE
In step 5, select [DATE] by pressing the UP ( ) /DOWN ( ) button and press
the OK button.
• Selecting TIME
In step 5, select [TIME] by pressing the UP ( ) /DOWN ( ) button and pres
the OK button.
5-function button