Chapter 1. ibm pc enhanced diagnostics error codes – IBM 6648 User Manual
Page 15
Chapter 1. IBM PC Enhanced Diagnostics error codes
Refer to the following Diagnostic Error Codes when using the IBM PC
Enhanced Diagnostics test. See the
″Diagnostic and test information″ section
for the specific model for information about the IBM PC Enhanced
Diagnostics program.
In the following index, X can represent any number.
Diagnostic Error Code
FRU/Action
000-000-XXX
BIOS Test Passed
1.
No action
000-002-XXX
BIOS Timeout
1.
Flash the system
2.
System board
000-024-XXX
BIOS Addressing test failure
1.
Flash the system
2.
System board
000-025-XXX
BIOS Checksum Value error
1.
Flash the system
2.
Boot block
3.
System board
000-026-XXX
FLASH data error
1.
Flash the system
2.
Boot block
3.
System board
000-027-XXX
BIOS Configuration/Setup error
1.
Run Setup
2.
Flash the system
3.
Boot block
4.
System board
000-034-XXX
BIOS Buffer Allocation failure
1.
Reboot the system
2.
Flash the system
3.
Run memory test
4.
System board
000-035-XXX
BIOS Reset Condition detected
1.
Flash the system
2.
System board
000-036-XXX
BIOS Register error
1.
Flash the system
2.
Boot block
3.
System board
© Copyright IBM Corp. 2000
1