IBM 6648 User Manual
Page 21
Diagnostic Error Code
FRU/Action
005-199-XXX
Video test failed, cause unknown
1.
Go to the
″Undetermined problems″ section
2.
Flash the system and re-test
3.
Replace component under function test
005-2XX-XXX
005-3XX-XXX
Video subsystem error
1.
Video card, if installed
2.
System board
006-000-XXX
Diskette interface Test Passed
1.
No action
006-0XX-XXX
Diskette interface error
1.
Diskette drive Cable
2.
Diskette drive
3.
System board
006-195-XXX
Diskette interface Test aborted by
user
1.
Information
2.
Re-start the test, if necessary
006-196-XXX
Diskette interface test halt, error
threshold exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
006-197-XXX
Diskette interface test warning
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Re-run test
3.
Component that is called out in warning statement
4.
Component under test
006-198-XXX
Diskette interface test aborted
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Flash the system and re-test
3.
Go to the
″Undetermined problems″ section
006-199-XXX
Diskette interface test failed, cause
unknown
1.
Go to the
″Undetermined problems″ section
2.
Flash the system and re-test
3.
Replace component under function test
006-25X-XXX
Diskette interface Error
1.
Diskette drive cable
2.
Diskette drive
3.
System board
011-000-XXX
Serial port Interface Test Passed
1.
No action
011-001-XXX
Serial port Presence
1.
Remove external serial device, if present
2.
Run setup, enable port
3.
System board
011-002-XXX
011-003-XXX
Serial port Timeout/Parity error
1.
System board
Chapter 1. IBM PC Enhanced Diagnostics error codes
7