IBM 6648 User Manual
Page 20
Diagnostic Error Code
FRU/Action
005-024-XXX
Video Addressing test failure
1.
Video card, if installed
2.
System board
005-025-XXX
Video Checksum Value error
1.
Video card, if installed
2.
System board
005-027-XXX
Video Configuration/Setup error
1.
Run Setup
2.
Video drivers update
3.
Video card, if installed
4.
System board
005-031-XXX
Video Device Cable failure
1.
Video cable
2.
Monitor
3.
Video card, if installed
4.
System board
005-032-XXX
Video Device Controller failure
1.
Video card, if installed
2.
System board
005-036-XXX
Video Register error
1.
Video card, if installed
2.
System board
005-038-XXX
System BIOS extension failure
1.
Video card, if installed
2.
System board
005-040-XXX
Video IRQ failure
1.
Video card, if installed
2.
System board
005-195-XXX
Video Test aborted by user
1.
Information
2.
Re-start the test, if necessary
005-196-XXX
Video test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
005-197-XXX
Video test warning
1.
Make sure the component that is called out is
connected and/or enabled
2.
Re-run test
3.
Component that is called out in warning statement
4.
Component under test
005-198-XXX
Video test aborted
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Flash the system and re-test
3.
Go to the
″Undetermined problems″ section
6
Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649