Installing adapters, Adapter slots – IBM 6648 User Manual
Page 73
Advertising
Installing adapters
Adapter slots
To install an adapter in a PCI expansion slot:
1.
Remove the riser card housing and place the housing on its side with the
adapter slots facing up.
2.
Remove the adapter from its static-protective package.
3.
Remove the screw and adapter slot cover for the adapter slot into which
you installing the adapter.
4.
Install the adapter and insert the retaining screw.
Note:
If you are installing a Wake on LAN supported network adapter,
attach the Wake on LAN cable that came with the adapter to the
Chapter 2. Types 6568/6569/6648/6649
59
Advertising