Post error codes – IBM 6648 User Manual
Page 167
2.
Set Power-On Self Test to Enhanced.
Symptom/Error
FRU/Action
No beep during POST but computer works
correctly.
1.
System Board
No beep during POST.
1.
See “Undetermined problems” on page 171
2.
System Board
3.
Memory Module
4.
Any Adapter or Device
5.
Power Cord
6.
Power Supply
POST error codes
In the following index, X can represent any number.
POST Error Code
FRU/Action
000
SCSI Adapter not enabled
1.
Verify adapter device and Bus Master fields
are enabled in PCI configuration program.
See documentation shipped with computer.
02X
1.
SCSI Adapter
08X
Check SCSI terminator installation.
1.
SCSI Cable
2.
SCSI Terminator
3.
SCSI Device
4.
SCSI Adapter
101
System board interrupt failure
1.
System Board
102
System board timer error
1.
System Board
106
1.
System Board
110
System board memory parity error
1.
Memory Module
2.
System Board
111
I/O channel parity error
1.
Reseat adapters
2.
Any adapter
3.
System Board
114
Adapter ROM error
1.
Adapter Memory
2.
System Board
129
Internal cache test error
1.
Processor
2.
L2 Cache Memory
3.
System Board
Chapter 3. Types 6058/6059/6269/6578/6579
153