IBM 6648 User Manual
Page 29
Diagnostic Error Code
FRU/Action
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error
1.
Run Setup
2.
Flash the system
3.
System board
071-03X-XXX
Audio port failure
1.
Speakers
2.
Microphone
3.
Audio card, if installed
4.
System board
071-04X-XXX
Audio port failure
1.
Run Setup
2.
Audio card, if installed
3.
System board
071-195-XXX
Audio port Test aborted by user
1.
Information
2.
Re-start the test, if necessary
071-196-XXX
Audio port test halt, error
threshold exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
071-197-XXX
Audio port test warning
1.
Make sure the component that is called out is
connected and/or enabled
2.
Re-run test
3.
Component that is called out in warning statement
4.
Component under test
071-198-XXX
Audio port test aborted
1.
If a component is called out, make sure it is
connected and/or enabled
2.
Flash the system and re-test
3.
Go to the
″Undetermined problems″ section
071-199-XXX
Audio port test failed, cause
unknown
1.
Go to the
″Undetermined problems″ section
2.
Flash the system and re-test
3.
Replace component under function test
071-25X-XXX
Audio port failure
1.
Speakers
2.
Audio card, if installed
3.
System board
080-000-XXX
Game Port interface Test Passed
1.
No action
080-XXX-XXX
Game Port interface Error
1.
Remove the game port device and re-test the
system
080-195-XXX
Game Port interface Test aborted
by user
1.
Information
2.
Re-start the test, if necessary
Chapter 1. IBM PC Enhanced Diagnostics error codes
15