IBM 6648 - Manual (Page 25)

Diagnostic Error Code FRU/Action
018-0XX-XXX PCI Card Failure
1. Riser card, if installed
2. System board
018-195-XXX PCI Card Test aborted by user
1. PCI card
2. Information
3. Re-start the test, if necessary
018-196-XXX PCI Card test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
018-197-XXX PCI Card test warning
1. Make sure the component that is called out is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4. Component under test
018-198-XXX PCI Card test aborted
1. Make sure the component that is called out is
connected and/or enabled
2. Flash the system and re-test
3. Go to the ″Undetermined problems″ section
018-199-XXX PCI Card test failed, cause
unknown
1. Go to the ″Undetermined problems″ section
2. Flash the system and re-test
3. Replace component under function test
018-250-XXX PCI Card Services error
1. PCI card
2. Riser card, if installed
3. System board
020-000-XXX PCI Interface Test Passed
1. No action
020-0XX-XXX PCI Interface error
1. PCI card
2. Riser card, if installed
3. System board
020-195-XXX PCI Test aborted by user
1. Information
2. Re-start the test, if necessary
020-196-XXX PCI test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
Chapter 1. IBM PC Enhanced Diagnostics error codes 11