Emc shield (front), Emc shield (system board), Installing adapters – IBM 6648 User Manual
Page 154: Adapter slots
EMC shield (front)
Models that are not shipped with a CD-ROM drive have an EMC shield
covering the drive bay. To remove the EMC shield, remove the front cover.
Then, remove the single screw that holds the EMC shield in place.
EMC shield (system board)
Remove the eight screws that hold the EMC shield in place.
Installing adapters
This section provides information and instructions for installing and removing
adapters.
Adapter slots
Types 6058/6059/6269/6578/6579 have four expansion slots used to connect
adapters to the peripheral component interconnect (PCI) bus.
To install an adapter in a PCI or AGP expansion slot:
1.
Remove the adapter from its static-protective package.
2.
Remove the metal I/O bracket form the adapter slot.
140
Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649