Intermec 6710 - Manual (Page 104)

SECTION 4
"
Configuration
4-38 6710 Access Point User’s Guide
[Ports]
Use [Ports] to define options for the access point’s Ethernet
port, radio ports, and OWL/IP (IP tunneling) port. The
following sample screen shows all the ports.
Name MAC Address Status Hello Period
1 “omde” 00:00:00:00:00:00 <Enabled> <2 Seconds>
2 “omdpxma” 00:00:00:00:00:00 <Enabled> <2 Seconds>
3 “omdflca” 09:46:19:01:0a:02 <Enabled> <1 Second>
4 “omduhfb” 01:55:b2:b3:90:e5 <Enabled> <2 Seconds>
5 “omdip”
00:00:00:00:00:00 <Enabled> <2 Seconds>
Because the system software autosenses the type of radio
option installed in each port, your screen displays only the
ports for the installed radios.
The following chart defines options in the Name column.
Option Description
omde Ethernet port
omdpxma (or omdpxmb) WLIF (Proxim 2.4 GHz) radio port
omdflca (or omdflcb)
Falcon (900 MHz) radio port
omduhfb S-UHF radio port
omdip OWL/IP port (IP tunneling)
Select a port to display its options:
Name (Depends on the port.)
MAC Address 00:c0:b2:00:00:00
Status <Enabled>
Hello Period <2 Seconds>
[Ethernet]
[WLIF]
[Falcon]
[UHF]
[OWL/IP]