Intermec 6710 - Manual (Page 149)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-83
[IP Addresses]
The configuration screen for [IP Addresses] is:
Type Address
1 <Unicast> 0.0.0.0
2 <Unicast> 0.0.0.0
3 <Unicast> 0.0.0.0
4 <Unicast> 0.0.0.0
5 <Unicast> 0.0.0.0
6 <Unicast> 0.0.0.0
7 <Unicast> 0.0.0.0
8 <Unicast> 0.0.0.0
Each line in the IP Addresses Table contains one IP address
entry. Settings are:
Type <Unicast>
Address 0.0.0.0
Type
The Type setting specifies the type of Ethernet MAC
address used by the super root when forwarding frames
through the OWL/IP port. This setting allows flexibility in
configuring OWL/IP routing. In most cases, IP and MAC
address types should match. The MAC frame type and IP
address in combination dictate how GRE encapsulated
frames are forwarded to IP routers. Settings are:
Unicast
Multicast
Broadcast