Intermec 6710 - Manual (Page 252)

APPENDIX G
"
MIB
G-2 6710 Access Point User’s Guide
These MIBs are on the 6710 Access Point’s MIB disk. You
need to load the MIBs onto your management platform to
query the access point for these management objects.
Getting Started
Install the MIBs onto your management platform in this
order:
1. RFC1213.MIB
2. RFC1398.MIB
3. 6710MIB.MIB
" NOTE: If you are using HP OpenView for Windows, use the OpenView
Control/SNMP Manager/Manage Database menu items to add the
previous listed MIBs to the HP OpenView MIB database. If you are
not using HP OpenView for Windows, consult your network
management station user’s guide for instructions on adding MIBs.
MIB-II Information
MIB-II is for use with network management protocols in
TCP/IP-based internets. The 6710 Access Point supports
most of MIB-II. Table G-1 contains the major groups.