Intermec 6710 - Manual (Page 96)

SECTION 4
"
Configuration
4-30 6710 Access Point User’s Guide
Setting Description
Enabled All designated bridges flood to secondary
LANs. This setting allows the super root to
control flooding for all access points serving
as designated bridges for secondary LANs
(see page 4-57).
Registered Designated bridges flood according to their
individual flood register settings. This set-
ting allows individual designated bridges to
be configured separately.
Disabled
(Multicast and
Unicast default)
Flooding is disabled in all designated
bridges. This setting allows the super root to
control flooding for all access points serving
as designated bridges for secondary LANs
(see page 4-57). This setting should be used
only if Inbound flooding is Disabled.
Outbound to Stations
Outbound to Stations applies only to access points with the
WLIF radio option. Settings are:
Enabled
Disabled
Setting Description
Enabled Frames are flooded.
Disabled
(Multicast and
Unicast default)
Frames are not flooded.