Intermec 6710 - Manual (Page 80)

SECTION 4
"
Configuration
4-14 6710 Access Point User’s Guide
Use To
Read
(Continued)
The access point’s configuration is stored in
EEPROM. You reprogram the EEPROM
whenever you change the configuration, write
(save) the new configuration to EEPROM, and
reboot the access point.
Write Write (save) a new configuration to EEPROM.
This command overwrites the previous configura-
tion. You must write the new configuration
to EEPROM and reboot the access point for
any changes to take effect.
Reboot Reboot the access point. You must reboot the unit
for any changes you made to the configuration to
take effect.
Exit Quit the configuration program. If you exit a new
configuration without writing it to EEPROM, any
changes you made are not saved.
? Display online help for a command, option, or
setting.
Using the View Command
To view or modify configuration program settings, type
View at the command prompt. The Main Options Menu
appears:
[Tcpip]
[Bridge]
[Security]
The following chart describes how to use the options.