Intermec 6710 - Manual (Page 125)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-59
Flood Register
As the designated bridge for this secondary Ethernet LAN,
the access point can register the type of frames it expects to
flood — unicast, multicast, or both. This information is
registered with other access points. Setting [Global
Flooding] settings in the super root overrides individual
Flood Register settings in designated bridges.
Flood Register settings are:
Disabled
Multicast
Unicast
Enabled
" NOTE: Set the same Flood Register setting in any access point that is a
candidate to become the designated bridge for a secondary Ethernet
LAN.
Setting Description
Disabled
(default)
No flooding occurs. (The super root, however,
enables flooding if the Outbound to Secondaries
Multicast or Unicast option is set to Enabled.*)
Multicast Enables multicast flooding. (The super root
disables multicast flooding if the Outbound to
Secondaries Multicast option is set to Disabled.*)
No unicast flooding occurs. (The super root
enables unicast flooding if the Outbound to
Secondaries Unicast option is set to Enabled.*)
Unicast Enables unicast flooding. (The super root disables
unicast flooding if the Outbound to Secondaries
Unicast option is set to Disabled.*)
No multicast flooding occurs. (The super root
enables multicast flooding if the Outbound to
Secondaries Multicast option is set to Enabled.*)
* See page 4-29 for more information about Outbound to
Secondaries.