Intermec 6710 - Manual (Page 185)

SECTION 5
"
Software Download
6710 Access Point User’s Guide 5-25
PWD
PWD opens a password-protected menu that contains file
management commands. Some of the commands delete
files. Others redefine the access point’s file structure. In
either case the commands can cause undesirable results if
not properly executed. If in doubt on the proper procedure
to use, contact Technical Support for assistance.
To open the password menu, type the following:
ap>
pwd
The following displays:
Enter password:
The password is CR52401OWL (must be in uppercase).
Following is the password menu.
FD - File System Directory FPD - PCMCIA File Directory
FE<s/all> - Erase Segment(s) FPE - Erase PCMCIA Card
FI - File System Reset FPX - Ymodem File to PCMCIA
FS s n - Define File Segment PQ - Power-Up Quiet
FB s - Set Boot Segment PN - Power-Up Normal
FFR f - Run File MI string - Set Modem Init String
FPC f s - PCMCIA File to Flash RMI - Reset Modem Init String
X - Exit
FD
The FD command displays the segment allocation table and
file directory. See “Fd Command” on page 5-6 for more
information.
FE <s|all>
FE erases specified or all segments of FLASH memory. See
“Fe Command” on page 5-8 for more information.