Intermec 6710 - Manual (Page 46)

SECTION 3
"
Installation
3-2 6710 Access Point User’s Guide
Preparing for the Installation
" NOTE: Someone who knows and understands all applicable local building
codes and is proficient with the tools and equipment used to install
FCC Class B electromechanical devices should physically install the
access point.
Before you install the access point, unpack it and inspect it
for damage or missing parts. Save all the paperwork you
received. If the access point appears to be damaged, contact
the Customer Response Center for instructions on
returning the unit for replacement.
The shipment contains the access point with FLASH and
the following items:
"
Mounting bracket
"
AC power cord
"
Warranty card
Collecting the Equipment
Before you install the access point onto the network, collect
the equipment you will need.
Ethernet LAN Components
The access point directly connects to 10BASE2, 10BASE-T,
or 10BASE5 Ethernet medium. Consult a cabling reference
for maximum run lengths and node limits for Ethernet
wiring.