Intermec 6710 - Manual (Page 167)

SECTION 5
"
Software Download
6710 Access Point User’s Guide 5-7
Following are field descriptions:
"
“File Directory name” lists the names of all files
currently loaded in FLASH.
"
“seg” is the segment in which the boot file is loaded.
(R indicates the RAM segment.)
"
“type” is the type of file: E for executable (boot file), D
for data.
"
“length” is the file size in bytes.
"
“date” and “time” are the date and time the file was
created.
"
“ver” is the file version number in the format vxx.xx.
You should use the Fd command often to ensure that the
correct version of FLASH file USTART29.BIN is in the
active boot segment.
" NOTE: If the active segment contains no files when you reboot the access
point, the unit enters the ROM command monitor and you lose the
ability to Telnet to it during this session. In this case you must
access the unit through its DIAG port to correct the problem.
Fdel Command
Fdel deletes the file name from the access point file system.
When you delete a file, it is marked as invalid but remains
in the file system. To reclaim the space from a deleted file,
you must erase the segment in which the file resides.
The command’s format is:
File>
fdel <file name>
EXAMPLE: This command erases the file USTART29.BIN saved in the inactive
boot drive:
File> fdel ib:USTART29.BIN