Intermec 6710 - Manual (Page 184)

SECTION 5
"
Software Download
5-24 6710 Access Point User’s Guide
FR
" NOTE: The first executable file in the access point boot segment must be
the access point boot file.
FR finds the first executable file in the access point’s boot
segment, and tries to run the file.
NPWD
NPWD is for internal use by service personnel only.
SR z
Serial baud rate command SR z sets the baud rate of the
access point. The format is:
ap> sr <baud rate>
Baud rates are:
2400
4800
9600
(default)
14400
19200
28800
38400
57600
Type the desired baud rate as a whole number (no decimal
equivalent), with no commas. For example, to enter a baud
rate of 19,200, type 19200 — not 19.2 or 19,200.