Intermec 6710 - Manual (Page 95)

SECTION 4
"
Configuration
6710 Access Point User’s Guide 4-29
Inbound options are:
Multicast <Primary>
Unicast <Disabled>
Multicast and Unicast options have the following settings:
Enabled
Primary
Disabled
Setting Description
Enabled Access point floods to all ports, similar to a
conventional bridge.
Primary
(Multicast default)
Frames are flooded inbound only. This
setting is useful in many wireless installa-
tions where the super root, servers, or
gateways for wireless stations are on the
same Ethernet segment.
Disabled
(Unicast default)
Frames are not flooded. Use this setting
only if the Outbound to Secondaries option
is also set to Disabled.
Outbound to Secondaries
Outbound to Secondaries floods frames with unknown
destinations to secondary LAN segments. Settings are:
Enabled
Registered
Disabled